Product Details:

Total length: 78mm

Material:BRASS

Air inlet：1/4",

Gas/Oil inlet: 1/8",

Bore diameter: 0.5MM 0.8MM 1.0MM 1.5MM 2.0MM 2.5MM 3.0MM 3.5MM

Nozzle size: 9/16"

Features：

· The use of compressed air to swirl inside the tubes and mix the atomized droplets impact.

· Can produce tiny micro particle size mist particles at low pressure and low volume conditions.

· Can control the air flow and pressure to adjust the spray flow, angle and size granularity.

· Since the fluid passage of nozzle is large, it have a good anti-clogging effect.

· In the heavy oil, waste oil burner, oil and other application viscosity of the liquid atomization effect is very good.

· The working pressure range is 0-10/kg/cm2, different flow capacity needs different filter screen

Flow capacity range is 1.5-1.7 L/h, needs a 45um oil filter screen

Flow capacity range is 1.89-3.78 L/h, needs a 75um oil filter screen

Flow capacity range is 4.76-5.10 L/h, needs a 125um oil filter screen

Flow capacity range is 5.68-41.64 L/h, needs a 140um oil filter screen

Flow capacity over 45.42L/h, no need for oil filter screen

Working pressure is 3 bar:

0.5mm diameter, the liquid water flow is 4 L/H;

0.8mm diameter, the liquid water flow is 6 L/H;

1.0mm diameter, the liquid water flow is 8 L/H;

1.5mm diameter, the liquid water flow is 11L/H;

2.0mm diameter, the liquid water flow is 14L/H;

2.5mm diameter, the liquid water flow is 17L/H;

3.0mm diameter, the liquid water flow is 20L/H;

3.5mm diameter, the liquid water flow is 23L/H;

4.0mm diameter, the liquid water flow is 26L/H;

The siphon height is 30cm, and the spray angle is 15-45 degree.

Kindly be noted above data is base on water for reference

Test：

Normally the working pressure is 3 bar, for 1.00mm version, the liquid waste is 10L/H. For 2.0mm version, the liquid waste is 19L/H. For 3.0mm version, the liquid waste is 28L/H. The capacity tolerance is ±10%. The siphon height is 30cm, and the spray angle is 45 degree.

Kindly be noted above data is base on water for reference, if you use other liquid, you can calculate it by the proportion of density.

Installation：

The air compressor should be capable of providing at least 10% more air than the specified values. All fuel and airline connections must be tight. Any leaks, especially in the fuel line, will have an adverse effect on the lift characteristics.

The nozzle will flow in either a horizontal or vertical position. The lift distance for a vertical mounted nozzle is measured from the liquid level to the end (face) of the nozzle. The lift distance for the horizontal mounting is shown in the installation drawing.

If the combustion application does not permit the use of a constant level device, excellent spray characteristics can be obtained using a fuel metering pump and an air compressor. It is also possible to operate the nozzle in a closed pressurized system utilizing air pressure for both lifting and atomizing the fuel.

1. Features:

(1). The use of compressed air to swirl inside the tubes and mix the atomized droplets impact.

2. Application:

3. Introduction:

 If you need those product ,please contact us ,I'll send the product link to you immediately.
Welcome To Contact Us For Best Shipping Way, Saving Shipping Cost
   If you find that the freight shipping to your address is very high.
Please feel free to leave message and contact us.We will try to find the best shipping way for you. To save the shipping cost.

More discount for you!

There is more discount for you if you buy over 2Lots OR Collection our shop ...

About Payment

1. We accept all payment methods listed by Aliexpress. Click to View More.
2. Payment must be made within 3 days of order.
3. If you have decided to buy this item,please pay as soon as you can,so we can immediately arrange delivery for you.

About Shipment

1. All the parcels will be sent via Aliexpress official shipping method, and they will be all traceable.
2. After parcel sent out, it will become uncontrollable. We will appreciate your patience during the delivery period. Estimate delivery time is 15~45 days for most of the countries (except for Brazil).But delivery time may be longer during holiday or promotion period.
3. We are not responsible for any taxes or VAT on the customs of buyer's country.
4. If after 45 days you don’t receive the parcel, please contact us. We will submit a search with the shipping agent and help to track the logistics information for you. If after 60 days, you still do not receive the parcel, you can contact with us to fully refund to you.

About Warranty

1. For all products we offer one year warranty.
2. For products with quality problem, please provide us some photos or vedio. We will discuss the solution for you.
3. If you want to return/exchange products because of personal reason, it is available. You have 7 days to contact us and 30 days to return it from the date it was received. If this item is in your possession more than 7 days, it is considered used and we will not issue you a refund or replacement. You also need to afford the returned shipping cost.
4. All returned items must be in the original packaging and you must provide us with the shipping tracking number, reason for the return, and your order number.

1. If you are satisfied with our items and our service,please take a minute to leave us possitive feedback with all 5 stars .we will appreciate it.
2. Any problem,please contact us, please keep away from negative feedback. We can give you the best solution.


1. If you are satisfied with our items and our service,please take a minute to leave us possitive feedback with all 5 stars .we will appreciate it.

2. Any problem,please contact us, please keep away from negative feedback. We can give you the best solution.

Product Details:

nozzle Total length: 78mm

nozzle Material:BRASS

nozzle Air inlet：1/4",

nozzle Gas/Oil inlet: 1/8",

nozzle Bore diameter: 0.5MM 0.8MM 1.0MM 1.5MM 2.0MM 2.5MM 3.0MM 3.5MM

Nozzle size: 9/16"
In general,we will send the 8mm connector,if you need 6mm or 10mm,please contact with us or writing in note,thanks

Features：

· The use of compressed air to swirl inside the tubes and mix the atomized droplets impact.

· Can produce tiny micro particle size mist particles at low pressure and low volume conditions.

· Can control the air flow and pressure to adjust the spray flow, angle and size granularity.

· Since the fluid passage of nozzle is large, it have a good anti-clogging effect.

· In the heavy oil, waste oil burner, oil and other application viscosity of the liquid atomization effect is very good.

· The working pressure range is 0-10/kg/cm2, different flow capacity needs different filter screen

Flow capacity range is 1.5-1.7 L/h, needs a 45um oil filter screen

Flow capacity range is 1.89-3.78 L/h, needs a 75um oil filter screen

Flow capacity range is 4.76-5.10 L/h, needs a 125um oil filter screen

Flow capacity range is 5.68-41.64 L/h, needs a 140um oil filter screen

Flow capacity over 45.42L/h, no need for oil filter screen

Working pressure is 3 bar:

0.5mm diameter, the liquid water flow is 4 L/H;

0.8mm diameter, the liquid water flow is 6 L/H;

1.0mm diameter, the liquid water flow is 8 L/H;

1.5mm diameter, the liquid water flow is 11L/H;

2.0mm diameter, the liquid water flow is 14L/H;

2.5mm diameter, the liquid water flow is 17L/H;

3.0mm diameter, the liquid water flow is 20L/H;

3.5mm diameter, the liquid water flow is 23L/H;

4.0mm diameter, the liquid water flow is 26L/H;

The siphon height is 30cm, and the spray angle is 15-45 degree.